16
©
2000 Directed Electronics, Inc.
Programming Options
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some may
require additional installation labor. This system's programming
options are listed below, with the factory default settings in
bold
:
■
12
, 24, or 60 minute run time. Your system can be pro-
grammed to allow the vehicle to run for 12, 24, or 60 min-
utes when remote started or in Timer Mode.
■
Parking lights
flashing
or constant. Your system can be pro-
grammed to either flash or to turn on the parking lights con-
stantly during the entire remote start operation.
■
Passive Mode or
Active Mode
. In Passive Mode the Failsafe
®
Starter Kill will automatically activate 30 seconds after the
ignition has been turned off.
■
Ignition switch-controlled door-locking
on
or off. With this
feature on, the doors will lock 3 seconds after the ignition
key is turned on, and unlock when the ignition key is turned off.
■
Passive Locking or
Active Locking
(doors lock only with the
transmitter). With Passive Locking, the vehicle doors lock
automatically 30 seconds after the ignition has been turned
off. Passive Locking can only be selected when the system
has been programmed for Passive Mode.
■
The horn honk confirmations for locking and unlocking can
be programmed
on
or off. In order for this feature to be pro-
grammed on, the horn must be connected to the system.
