7
©
1999 Directed Electronics, Inc.
To enter or exit Valet
®
Mode with the Valet switch:
Turn ignition to “on” position,
then turn to “off” position.
Press and release the Valet
switch within 10 seconds. The
status
LED will light steady if you have
entered Valet Mode. To exit Valet
Mode, repeat the steps above.
The LED will turn off when exiting Valet Mode.
Remote Valet is a convenient feature that makes bypassing the
security system easier. This feature makes it possible to exit or
enter Valet Mode using your factory keyless transmitter.
1.
Open any door.
2.
Press LOCK on the transmitter.
3.
Press UNLOCK on the transmitter.
4.
Press LOCK on the transmitter.
The status LED will stay on if you have entered Valet Mode, and it
will go out if you exited Valet Mode.
NOTE:
The Remote Valet feature will not work with all factory keyless
entry systems. Some keyless entry systems do not work with a door open.
Remote Valet
