Application
The
HVI
®
head holder
allows to use a cordless screw driver for removing the outer sheath and the PE
insulation of
HVI Conductors
.
The following stripping inserts from
DEHN + SÖHNE
can be used with the
HVI
®
head holder
(preset
stripping length of 35 mm):
HVI
®
head 20
HVI
®
head 27
Assembly
The male connector of the relevant stripping insert is inserted in the female connector of the
HVI
®
head
holder
and turned clockwise (bayonet cylinder with two pins) to firmly fix it. After that, the triangular
bolt of the HVI®head holder is inserted in the three-jaw chuck of the cordless screw driver and fixed by
means of the quick-release clamping mechanism (see Fig. 1)
1
Fig.
!
HVI®head 20
HVI®head 27
HVI®head holder
Wear protective goggles when using the
HVI®head holder
with
HVI®head...
stripping insert!
standard cordless
screw driver
with
three-jaw chuck
male connector of the bayonet coupling
(bayonet cylinder with two pins)
female connector of the bayonet
coupling (two recesses for the pins)
triangular bolt (Ø 10 mm)
for three-jaw chuck
GB
Instruction leaflet
Publication No. 1859 / UPDATE 04.14 Mat. No. 3001062
GB
