12
Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) •
✆
+31 (0)88 - 20 20 600 •
[email protected] • www.dehaco.nl
4. Commissioning
4.2. Use
◊ Squeeze the handle of the shower head to rinse
off.
◊ The drainage pump comes on automatically during
showering.
◊ When the water tank contains approximately one
minute of shower water, the water pump rapidly
switches on and off a number of times to cause the
hose and shower head to vibrate. This is the sign
that the water tank is almost empty.
◊ The drain pump continues to pump as long as
it is supplied with water; it will then shut off
automatically. This means all the shower water will
be discharged.
◊ Press the green circular button (to the right of the
on/off switch) to manually switch the drainage
pump back on.
◊ Refill the water tank after every use.
4.3 After showering/end of the working
day
After showering or at the end of the working day:
◊ Rinse the shower area and allow the water to drain
through the YO28.
◊ Suck a few litres of clean water through the YO28
to clean the red hose.
◊ Pull the plug from the wall socket.
◊ Open the drainage tap on the left side so the
remaining water can drain out of the machine.
◊ Disconnect all three hoses and roll them up.
◊ Remove the water filter. Pack and dispose of in
accordance with asbestos legislation.
◊ The YO28 is now clean and empty and can be
transported to the next location.
