8
2. Overview | 3. Transport and storage
Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) •
✆
+31 (0)252 - 41 79 50 •
[email protected] • www.dehaco.nl
2. OVERVIEW
2.1 General description
This equipment is used in work areas where the air
flow must be controlled. This is the case during work
whereby hazardous or inconvenient dust particles are
released, such as asbestos, chromium 6 and ceramic
fibres. With the aid of the air mover, a negative
pressure is created within the guarded work area,
preventing contaminated air from leaving the work
area. In addition, the concentration of particles in the
air is reduced and the contaminated air is filtered by
means of a HEPA filter.
2.2 Scope of delivery
The delivery of a Dehaco negative pressure unitconsists
of:
Ø
the machine
Ø
a user manual
Ø
A power cable (not for the DEH30000)
Immediately at delivery, check that the machine is
complete and undamaged. Please contact
your supplier if parts are missing or in case of
transport damage.3. TRANSPORT AND STORAGE
3. TRANSPORT AND STORAGE
3.1 Transport
DEH negative pressure units are relatively light-weight
and are provided with castors -with brakes- and
handles.
The large DEH 30.000 can be subdivided into two parts,
to make transport easier
Always properly fasten the machine when transporting
it.
BEWARE!
If the Dehaco negative pressure unitmust be
transported in contaminated condition:
-
Apply tape all around the transit plate, making
sure it is closed air tight
-
Make yourself familiar with applicable
legislation regarding the transport of
hazardous substances
3.2 Storage
In case of longer decommissioning, it is recommended
to perform the following actions:
-
Clean the DEH negative pressure unit.
-
Perform maintenance.
-
Store the machine in a dry, ventilated and frost-
free room.
