19
Degree-n DIA2104-005
DEU
ENG
Safety
2 Safety
2.1 Personnel-related preconditions
The electrical installations must be performed according to the
current national VDE regulations as well as according to the regula-
tions of your local electric power utility company. These instructions
require special knowledge corresponding to an officially acknowl
-
edged degree in one of the following professions:
• Systems Mechanic for sanitary, heating and air condition technology
• Electrical Equipment Installer or
• Electronics Engineer
according to the profession designations officially announced in the
Federal Republic of Germany, as well as according to comparable
professions within the European Community Law.
2.2 Intended use
The Degree-n Switch Actuator and Meter – flush-mount 12 A (16 A
for max. 20 min.) (FSM 26011-xx) is a component of the Degree-n
System and serves
•
for a fixed installation in environments of residential use,
• for switching connected electronic consumers,
• for measuring energy consumption and energy cost of connect-
ed consumers,
• for the connection of further Degree-n components and the
communication with these.
Every other use, modification and conversion is expressively forbid
-
den. Improper use leads to dangers the manufacturer cannot be held
liable for and will exempt guarantees and liabilities.
2.3 Safety notes
All safety notes in these instructions must be observed in order to
avoid accidents causing personal damage or property damage.
No liability is assumed for personal damage and property damage
caused by improper use or non-observance of the danger notes. In