Degraf CONCEPT 501, User Manual

Page: 6 / 27

INSTALLATION
Eng. Version 3.1
Page 6 / 27
Upon receipt of your machine please check with the carrier the status of the crate. Notify
him of any damage you see on the crate.
Before starting to unpack the unit, make sure you have all required tools ready to hand.
Unpacking:
Warning: For safety reasons, please wear appropriate protective clothing (gloves, glasses,
and safety shoes) while unpacking.
•
Start by removing the top section of the crate.
•
Remove the sides one by one.
•
The machine is now resting on the base of the crate.
•
Remove all the blocking pieces of wood and the blocking nuts fixing the machine on
the crate.
•
In case the Light finisher is delivered with the Dryer: Start by removing the Light
finisher located on top of the dryer by using the appropriate forklift. Get it into its
installation location. Be sure that the forks are long enough to lift the machine
without damage. Then remove the wood legs in order to access to the Dryer.
•
Ensure there is sufficient space around the machine (see Pre-installation section).
•
Remove all the protection from the unit (do not use sharp tools to prevent
damages).
•
No special anchorage is needed for this unit. The unit will rest only on its feet.
•
Align the machine precisely by means of a water gauge. The alignment is made by
using the adjustable feet. Be sure the machine is no more resting on its wheels.
Parts delivered with the machine :
Items : Qty :
Hose 80 mm. 3 m.
Locking collars 2
Panel key 1
Feet (12mm diameter) 4
Verify that all parts are with the machine.