Degometal GO251, Manual

Page: 29 / 90

27
• The tool is equipped with overload protection. In
the event of an overload, the operation will be
stopped and the warning light shows. Release the
trigger and the jaw assembly will return to the start
position;
2.3 Trouble Shooting
2.3.1 Blind rivet cannot be set
Troubles and Causes Remedy
When depressing the
trigger, 4 LED power
indication lights blink in
rotation, indicating low
power
Charge battery
Battery damaged Change battery
Jaw assembly loose
Tighten the assembly
(see 4.)