DEGEN de28, Operation Manual

Page: 9 / 18

TUNE I N S TATIONS TUNE I N S TATIONS
Auto tuning
:
Menu.
2. Adjust the volume to an appropriate level and
choose your desired band.
3. Press and hold < > or < > for about 2
seconds, then release to auto tune into the
next available station. If the auto-tuned station
frequency is inaccurate, please use manual
tuning to find the accurate frequency point.
1. Turn on the unit and select [Radio] in Main
Jog tuning
:
Menu.
2. Adjust the volume to an appropriate level and
choose your desired band.
3. Rotate <
Tuning knob > and notice the
frequency changing in the display, stop rotating
when the radio receives a satisfactory station.
1. Turn on the unit and select [Radio] in Main
Memory location
Auto search (ATS):
1. T urn on the unit and select [Radio] in Main
Menu.
2. A
djust the volume to an appropriate level and
choose your desired band.
3. Press <
MENU > to open the sub-menu and
select [Auto search], press < MENU > again to
start auto tuning and store all the available
stations into memory.
Memory Locations:
FM:
M001 - M440
MW
:
M001 - M132
SW: M001 - M928
Memory recall
1. Turn on the unit and select [Radio] in Main
Menu.
2. Press <
M+/ERC > or < M-/ESC > to select a
station that stored within the memory.
STORING STATIONS MANUALLY
Select your desired station, press < MENU > to
open the sub-menu and select [Save], press
<
MENU > again to confirm. The stored station’s
memory location will be sorted according to the
size of the frequency number.
11 12
89.8
FM
MHz
M005
NOTES:
After storing stations into memory, you can use Memory
Recall to find the stored station quickly.
All the stations that stored manually will be replaced
when using Auto Search (ATS).