background image

DE1103 - page 6/6 

This radio is a dual conversion radio, the first IF is 55.845 MHz., 
and the second IF is 450 kHz. 
 
Use the Narrow/Wide Switch 

(14)

 to select the most suitable 

bandwidth for listening : 
 
Wide : bandwidth is 6 kHz, better sound quality but selectivity is 
ordinary 
Narrow : bandwidth is 4 kHz, sound is dull but selectivity is 
good. 
 
 

RESET FUNCTION 

 
The IC inside the radio may be affected by outside interference, 
resulting in the radio not operating properly. 
When this occurs, use a sharp and thin object to press the 
Reset Hole 

(2)

The radio will be back to normal, all memory presets are still 
there, but you will have to re-set the clock. 
 
 

LINE OUT 

 
This radio can provide good audio signals to outside amplifiers. 
The sound quality when connected in this way is much better 
than the sound from the speaker of the radio. 
The line output signal of this radio is unaffected by the tone and 
volume controls on the radio. 
 
 

EARPHONE 

 
A good quality stereo earphone is supplied with the radio. 
When using the earphone, the speaker on the radio will be 
disconnected. 
You can listen to quality FM stereo programs by using the 
earphone with this radio. 
 
 

SSB/CW RECEPTION 

 
1. The SSB function is applicable from 100 – 29999 kHz on this 

radio. 

2. Press the SSB button 

(6)

, tune the SSB fine tune knob to set 

the BFO signal to zero beat. 

3. Rotate the “TUNE” knob 

(15)

 to search for the SSB signal. 

4. When the SSB signal is received, tune the SSB fine tune 

knob 

(12)

 to the position where the SSB signal is the clearest. 

 
Most SSB and CW signals are often found in these 
frequencies : 
 7000 

– 

7100 

kHz 

(LSB) 

 13107 

– 

13179 

kHz 

(USB) 

 14000 

– 

14305 

kHz 

(USB) 

 21000 

– 

21405 

kHz 

(USB) 

 
 
 

SPECIFICATIONS OF DEGEN DE1103 RADIO : 

 
  1.  Frequency range : 
 

  FM : 76.00 – 108.00 MHz 

 

  MW : 100 – 29999 kHz 

 

  SW : 1710 – 29999 kHz (11 m to 90 m). 

 2. Selectivity : 
 

  FM : better than 10 µV 

 

  MW : better than 1 mV/m 

 

  SW : better than 20 µV. 

  3.  Shortwave selectivity : 
 

  Wide – better than 40 dB 

 

  Narrow – better than 50 dB. 

  4.  Second IF for AM : 
 

  Wide – less than 6 kHz 

 

  Narrow – less than 4 kHz. 

  5.  Line out is not affect by volume and tone controls of the 

radio. 

 6. Power : 
 

  Battery : 4 x AA size 1.25 V 1300 mA (NiMH only) (incl.) 

 

  Recharge time : 1 – 23 hours (ajustable) 

 

  External DC power supply 220 VAC / 6 VDC, 300 mA (incl.) 

 

  Note : To USA use : need 110 / 220 VAC transformer (opt.) 

 

   

To Europa use : need a wall plug adapter (not incl.). 

  7.  80 mm / 3 inch internal speaker. 
  8.  FM stereo possible through the earphone. 
 9. Dimensions : 165 x 105 x 29 mm / 6.5 x 4 x 1 inch, 

approximately. 

 10. Weight : 
 

  300 gram / 11 oz. (without battery). 

 
 

Summary of Contents for DE1103







Reviews: