The battery power is divided into 4 levels.
Full
Medium
Exhausted, auto shut off
Lower
POWER INDICATION
BATTERY CHARGE
When battery power indicates from to , the unit will
shut off automatically.
While the unit is on, if appears in the display when using
rechargeable batteries, batteries need to be charged.
3
4
1. Install three AA rechargeable batteries with correct polarity.
2. onnect
the
other side securely to DC Jack .
Plug the adaptor into an 220V AC power outlet, c
23
3. With the radio turned off, press the CHARGE button , the
power indicator will flash for 4 seconds. Press number
button 1..9 to select charging hours according to battery
capacity in flashing time, otherwise the unit will exit from
charge mode.
4. The charging time indicates in the display. When charging has
been completed, the unit stops charging automatically.
5
CLOCK FUNCTION
The unit has two clock modes (12H/24H) for user to select.
The default time of the unit is
12:00.
Set the clock to the current
time.
1. If the unit is turned on, press POWER button to turn it off.
2. Press ENTER button twice, indicator flashes for six
seconds.
3. While is flashing, press number button to set current time.
SET THE CLOCK
ENTER
20
button 0~9
6
ENTER
+
CLOCK FUNCTION
If charge time is not been set, the unit will exit from the charge
mode.
Keep the unit off when charging.
Battery charge will be terminated once the unit turns on.
The unit will adjust the current speed automatically during
charging.
Use NiMH batteries, and do not charge them for more than
seven hours.
When using new rechargeable batteries or those which have
not been used for a long time, charge them fully, then use them
until they have completely run down. Repeat this cycle two
more times, then those batteries can be used normally.
Do not leave fully charged batteries unused for a long time.
