C
Moving Into Transport Position
3
3
6)
Read and follow necessary safety procedures outlined
in “Transport Safety” section of the manual.
5)
Close the floatation plate using the ratchet jack and
secure into transport position with the red transport pin.
4)
Install the four cylinder transport bars onto the center &
end wheel cylinder shafts and secure.
4
5
*
Refer to operators manual for complete safety and operation info.
• Check for missing, worn or damaged parts.
• Working points & pins
• Hydraulic Connections & Hoses
• Hubs & Spindles
Maintenance
(Check Machine Daily)
1)
On level ground, extend center wheel lift cylinders to
fully lift rollers off ground. (This will tighten autofold
cables and open the “Swing Arm” latches.)
2)
Extend end wheel circuit to fully lift wing rollers off the
ground.
3)
Drive forward until roller wings trail behind.
1
2
© 2021 Degelman Industries LP
