3
Use appropriate cable types
To ensure compliance with the parameters of the product, only use the recommended cable types described in this manual.
Dispose of used products and tra
n
smitt
e
r sensors with respect to the environment
Transmitter sensors contain hazardous substances. Dispose of them in accordance with the current legislation on
environmental protection.
Use the transmitter only with the appropriate certified DEGA products
The device is certified as functionally and technically qualified only with original "DEGA" accessories. In case of using the
device with any other products the manufacturer is not liable for any damages that may occur.
Undertake regular functional checks and calibrations of the transmitter
Perform regular "CALIBRATION" (setting the detection limits, checking the responsiveness of the sensor, checking the
functionality of the transmitter) and "OPERATIONAL AND FUNCTIONAL CHECKS" of the entire detection system (sensor
excitation with subsequent control of optical and audible alarms, triggering fans, shutdown technology, etc.). Perform
calibration and operational and functional checks only at certified service centers with a valid certificate of competence or at
the manufacturer.
Warning: The transmitter automatically checks it's calibration period - the period of validity of it's calibration. After 12 months since the
last calibration (max. calibration period) the transmitter will transmit this fact to the host system. The transmitter must be calibrated
immediately at a certified service center with a valid certificate of competence or by the manufacturer. See section "Monitoring the
calibration periods".
Technical data and information
Supply voltage:
230 V/ AC
Wire diameter range:
0,08-2,5mm
2
– wire, stranded wire 0,25-1,5mm
2
– stranded wire with ferrule
Output:
2x potential free relay
Dimensions without bushings
110x100x50 mm (WxHxD)
Weight:
0,3 kg
I
nput
Warm-
Up time
DEGA NBx-EL III LCD RE
1,1 W
DEGA NBx-EL III LCD RE
max. 180 s
DEGA NBx-CL III LCD RE
2,2 W
DEGA NBx-CL III LCD RE
max. 30 s
DEGA NBx-IL III LCD RE
1,7 W
DEGA NBx-IL III LCD RE
max. 15 s
DEGA NBx-SL III LCD RE
1,7 W
DEGA NBx-SL III LCD RE
max. 180 s
DEGA NBx-PL III PID LCD RE 2,2 W
DEGA NBx-PL III LCD RE PID max. 15 s
Consumption/input
i
n the ALARM
mode
Time to stabilize
(>5
day
s
without power
)
DEGA NBx-EL III LCD RE
2,2 W
DEGA NBx-EL III LCD RE
Up to several hours -
based on sensor
type
DEGA NBx-CL III LCD RE
3,3 W
DEGA NBx-CL III LCD RE
max. 1 h
DEGA NBx-IL III LCD RE
2,8 W
DEGA NBx-IL III LCD RE
max. 30 min
DEGA NBx-SL III LCD RE
2,8 W
DEGA NBx-SL III LCD RE
max. 1 h
DEGA NBx-PL III LCD RE PID 3,3 W
DEGA NBx-PL III LCD RE PID max. 30 min
Response time
(T90)
Sensor lifetime in a clean environment
DEGA NBx-EL III LCD RE
max. 180 s -
based on sensor type
DEGA NBx-EL III LCD RE
2 years
DEGA NBx-CL III LCD RE
max. 30 s
DEGA NBx-CL III LCD RE
2 years
DEGA NBx-IL III LCD RE
max. 30 s
DEGA NBx-IL III LCD RE
5 years
DEGA NBx-SL III LCD RE
max. 30 s
DEGA NBx-SL III LCD RE
2 years
DEGA NBx-PL III LCD RE PID max. 30 s
DEGA NBx-PL III LCD RE PID 2 years
Operational and storage conditions
Ambient temperature:
-20°C to +60 °C (electrochemical, semiconductor and catalytic sensors) -
20°C až +50°C
(infrared sensors)
Relative humidity:
10-90 % RH
Air pressure:
86 - 108 kPa
Ambient air flow:
max. 2 m/s - flow directly to the sensor in not allowed
IP rating:
IP 54
Location:
BE1 - non-explosive atmospheres
