Defy SB, Owner'S Manual

Page: 2 / 12

Page 2
• Please ensure that packaging material is disposed of in a responsible manner. Plastic
bags for example should be cut up to prevent children playing with them and acciden-
tally suffocating.
• If the appliance is damaged in any way, do not use it. Report the damage to your
dealer, who will take the necessary corrective action.
Congratulations on the purchase of this quality product.
We trust that you will enjoy many years of trouble free use. Please
read these instructions carefully before using the stove. This manual
will provide you with information on how to operate and care for your
product in order that you gain the maximum benefit from it.
Introduction.
Unpacking.
Installation.
•
This appliance should not be connected through an earth leakage system.
Refer to S.A.B.S. 0142.
Connection to the power supply must be carried out by a licensed electrician, who will
ensure that the oven is correctly connected and safely earthed. The rated current is printed
on the serial number label attached to the back of the stove.
The appliance must be connected to the mains through a double pole isolating
switch which has a minimum clearance between the contacts of 3 mm. in both poles.
A means for disconnection must be provided in the fixed wiring
.
•
Please ensure that packaging material is disposed of in a responsible manner.
•
Plastic bags should be cut up to prevent children playing with them and accidentally
suffocating.
•
Remove all packing from the oven cavity and position the accessories.
•
If the appliance is damaged in any way, do not use it. Report the damage to your
dealer, who will take the necessary corrective action.
Electrical installation.
“This appliance must be earthed and the manufacturer and the seller do
not accept responsibility for any damage due to incorrect installation or
electrical connection.”
•
Levelling feet are provided at each corner. Adjustments may
be made by tilting the stove and turning the feet in or out un-
til the stove stands firm and level.
•
Surfaces immediately adjacent to the oven should be able to
withstand temperatures of up to 100°C without delaminating
or discolouring.
•
Use of the splash panel is optional. The splash panel is
packed separately and may be fitted as shown. First care-
fully prise off the dome shaped plastic covers at the rear end
of the hob. Remove the screws and dispose of the domes
and retainer pieces. Hold the splash panel in position, insert
the screws and finger tighten ( to avoid cross threading) be-
fore final tightening with a screw driver.