background image

 

CONGRATULATIONS 

 

You are now the proud owner of one of the finest and most modern washing machines 
that today’s technology can produce. You and your machine are going to make a great 
team together. But first it will pay if you really get to know each other. This book will tell 
you all you need to know about your machine, what it will do and how to do it. Please 
read all the instructions carefully before operating the machine. 
 

INSTALLATION 

 

UNPACKING 

 

• 

Remove all packaging, the foam base plate cover and the convex 
plastic block. 

• 

Open the wash-tub lid and remove all the accessories stored in the 
drum. 

• 

Do not attempt to operate the machine while any of the packaging is 
still in place. 

 

THE BASE COVER 

 

• 

To prevent access to the mechanics of the machine by either 
children, pets or rodents a base cover is provided. 

• 

Tilt the back of the machine slightly forward and slide the base 
cover along the retaining rails at the bottom of the machine 
until it is fully in place. 

• 

Attach the base cover to the rear of the machine using the 
screw provided. 

 

 

POSITIONING 

 

• 

The machine has wheels for easy manoeuvrability. 

• 

Positioned the machine on a flat and stable surface 

• 

Adjustable levelling feet are located at the front of the 
machine and these may be turned in or out to achieve 
stability. 

• 

The machine should be installed in a well ventilated 
place, away from direct sunlight 

Summary of Contents for Laundromaid















Reviews: