Page 7
•
This Chest Freezer is designed for use on 220
-
240V
~
, 50 Hz.
•
This makes it suitable for operation in all areas in South Africa.
•
A moulded plug is fitted by the manufacturer, if the plug or power supply cord is
damaged they must be replaced by the manufacturer, their service agent or a similarly
qualified person in order to avoid a fire hazard.
Should the mains lead of the freezer
become damaged or should it need replacing at any time, it must be replaced by a
special purpose made mains lead which can only be obtained from a DEFY
Authorised
Service Agent.
•
No other appliance should be connected to the same terminal point.
•
Before you insert the plug into the wall socket make sure that the voltage and the
frequency shown on the rating label on the freezer corresponds to your electricity
supply. The rating label is located on the rear outer side of the freezer.
•
We recommend that the Chest Freezer be connected to the mains supply via a
suitably switched and fused socket. The Chest Freezer must be positioned so that the
plug is accessible.
This Chest Freezer must be earthed and the manufacturer and the seller do
not accept responsibility for any damage due to incorrect electrical connection.
Electrical Installation
Before operating, clean the inside of the freezer. (see “ Maintenance and Cleaning").
After the freezer has been cleaned, insert the plug of the Chest Freezer into the
wall socket. Adjust the thermostat knob to an average position.
Leave the freezer to work for about 3 hours without putting food inside it
.
Operation
