Page 5
•
Turn off the water supply at the
tap when the washing machine
is not in use to minimise the
risk of damage that could arise
from water leakage. Unplug the
washing machine if it is not
going to be used for a long
period of time.
•
Ensure that the water inlet pipe
is connected and the tap
opened before washing
clothes.
Intended use
• The washing machine is only
domestic use and for the
purposes for which it was
designed.
Transportation of the machine
1. Unplug the machine before
transporting it.
2. Remove water drain hose and
water supply hose connections.
3. Drain all remaining water from
the machine.
Ensure that the power plug and
power cord are properly
connected.
•
Never touch the plug with wet
hands!
•
Never unplug by pulling on the
cable, always pull out by
grabbing the plug.
•
Do not operate a damaged
washing machine.
•
If the power cable is damaged,
it must be replaced by the
manufacturer, after sales
service or a similarly qualified
person.
•
Never plug the washing
machine into the wall socket
during installation. Death or
serious injury may result.
•
For safety reasons, the wall
socket and the plug should be
accessible after installation.
•
Do not make connections via
extension cables or multi-plugs.
•
Pull out the plug from the wall
socket if the machine is not
going to be used.
Children's safety
• Electrical products are
dangerous for children. Keep
children away from the washing
machine when it is in use. Use
child lock to prevent children
from tampering with the
washing machine controls.
•
Do not allow children to play on
or in the machine. If a child
accidentally falls into the wash/
spin tub, serious injury could
occur. Close the lid when
leaving the room where the
machine is located.
Keep children away from the
washing machine and keep
boxes or steps well away from
the washing machine to
prevent children from stepping
up and accessing the controls,
lid and wash tub of the washing
machine.
•
Do not allow children to sit on
the washer.
Electrical connection
•
The washing machine must be
earthed and the manufacturer
and seller do not accept
responsibility for any damage
due to incorrect electrical
connection.
•
Connection must comply with
national regulations.
