16 - EN
interruption due to the pressing of keys while
the program is on. The loading door and all
keys except the “On/Off” key on the panel
are deactivated when the child-proof lock is
active.
In order to activate the childproof lock, press
on the “Start/Pause/Cancel” and “Cancel audio
warning” buttons simultaneously for 3 seconds.
To start a new program after the program is
over or to interrupt the program, the childproof
lock should be deactivated. To deactivate the
childproof lock, press the same buttons for 3 sec.
C
2 beeps when activating and 1 beep
when deactivating the child-proof lock is heard.
Ending the program through
canceling
The program which is selected first will keep
on going even if the position of the program
selection button is changed. A new program can
be selected and started after “Program cancel” is
activated in order to change the drying program.
To cancel any selected program;
•
Press “Start/Pause/Cancel” button for
about a duration of 3 seconds. The “Filter
cleaning”, “Water tank” and “End/ Anti-
creasing” warning LEDs will light up at the
end of this period for reminding purposes.
A
As the inside of the machine will be
excessively hot when you cancel the
program while the machine is running,
activate the ventilation program to cool it
down.
A
If the machine is stopped during any
drying program, and if the position of the
program selection knob is changed, an
audio signal will be heard (if the “Cancel
audio warning” function is not selected).
The machine will not start even if the “Start/
Pause/Cancel” button is pressed, unless
the program selection knob is returned to
the initial program. The paused program
must be cancelled in order to change the
drying program.
End of program
The “End/Anti-creasing”, “Filter cleaning” and
“Water tank” warning LEDs on the program follow
up indicator will light up when the program comes
to an end. The door can be opened and the
machine becomes ready for a second cycle.
Press the “On/Off” button to shut down the
machine.
C
A 2-hour anti creasing program to prevent
laundry from creasing will be activated if you
do not take the laundry out after the program
has come to an end.
C
Clean the filter after each drying (please see,
Filter cleaning).
C
Drain the water tank after each drying (please
see, Water tank)