Page 14
WARNING:
In the unlikely event of the
Vitroceramic sustaining accidental damage
or cracks, switch off the appliance at the
mains to avoid electric shock and have the
panel replaced before further use.
Caring for the Vitroceramic hob
•
Vitroceramic is a tough, durable material,
which provides a beautiful, functional and
long lasting cooking surface. To keep it
looking good, it needs to be treated with
care and cleaned regularly.
•
Wipe spillage off as soon as possible with
a damp cloth, preferably while the hob is
still warm.
•
Clean the hob with a nylon pad and a
suitable smooth top cleaning solution,
which is available from all Defy Service
Centres. Remove calcium stains (yellow
stains) by applying a small amount of lime
remover such as vinegar or lemon juice.
Other suitable commercially available
products can also be used.
•
If necessary stubborn spills may be
removed using an approved blade
scraper.
•
Do not use metal scourers or coarse
abrasive powders as these could scratch
the Vitroceramic.
•
Regular cleaning after use will prevent dirt
build up and ensure that the hob remains
bright and attractive.
•
Wipe the hob surround with a damp hot
soapy cloth and dry.
•
DO NOT USE A STEAM CLEANER.
Maintenance and care
Recommendations
•
Use only pots with a solid level base. An
uneven base will prolong cooking time
and waste energy.
•
Use pots with a base diameter slightly
larger than that of the thermal area. This
will ensure even heat distribution and
prevent spillage from dripping onto and
staining the hot zone.
•
Only use clean pots with an even flat base
to prevent cracking on glass due to hot
spots.
•
Always cover the pot with a lid. This will
conserve energy and minimize spillage.
•
Save energy by switching the plate off 5
to 10 minutes before the end of a lengthy
cooking period. The Vitroceramic hob will
retain sufficient residual heat to complete
the cooking process.
•
A pot with rough edges could scratch the
Vitroceramic if it were dragged across the
surface of the hob.
•
Any spillage of sugar solution such as
jam, must be removed immediately. If
allowed to cool on the Vitroceramic it
could pit and damage the surface.
•
Do not cover the Vitroceramic with
aluminium foil and do not use poor quality
aluminium pots. These will leave unsightly
deposits which in time, could adhere to
the Vitroceramic.
6