Defy DGS 129, Owner'S Manual

Page: 8 / 16

PAGE 8 OF16
Cleaning and maintenance
Gas Jet Cleaning Procedure
•
Every six months the gas jets on your hob should be cleaned to
ensure continued efficient and safe operation.
•
This may be done using a Gas Jet Cleaning Kit which may be
purchased from your nearest Defy Service Centre.
•
The kit comprises of a sliding T-bar (A) a socket (B) and a
‘Classic pin’ (C).
•
Fit the T-bar to the socket and remove the pot stands, burner
caps and burner bodies.
1. Insert the socket into the central tube of the burner so that it
locates over the brass gas jet at the bottom of the tube.
2.
Gently loosen the brass gas jet by turning the socket in a anti-
clockwise direction.
3.
Carefully lift the socket and loosened brass gas jet from the
central burner tube.
4.
Insert the Classic pin into central hole of the jet and slide it up and
down until the jet is free of accumulated dirt.
5.
Re-assemble in reverse order.
6. Clean all the burner jets in the manner described above.
JET CLEANING KIT
A
B
C
1
2
3
4