Page 5
Operation
2
Intended use
This appliance is intended only for
household use; it is not suitable for
professional use.
It is designed for chopping small amounts of
solid food only.
Initial use
Clean the appliance parts before initial use.
Operation
1. Place your appliance on a hard and flat
surface on its non-slip rubber base.
2. Remove motor unit (4) and middle cover
(3) from the glass container.
3. Place the chopper blade (6) on fixed shaft
(2) holding the plastic section.
4. Put the ingredients you want to prepare
into the glass container (1) (see. 3.4).
5. Place middle cover (3) on glass container
(1) (silicone seal facing down). Then, place
the motor unit (4) on top.
6. Plug in the appliance.
7. Run the desired speed pressing the
operation switch (5) (see. 3.4).
8. Do not use the appliance continuously for
more than 10 seconds. Turn off the device
when used for more than 10 seconds and
wait for 1 min. before operating again.
WARNING:
Fit the middle
cover (3) on glass container.
Otherwise, motor unit (4) will not
be seated securely and appliance
will not start.
WARNING:
Never touch the blades with your
bare hands.
Maximum quantities and processing time
See table below for maximum
and
processing time.
WARNING:
Do not run the
appliance continuously for more
than 10 seconds at a time in
order to prevent overheating.
After running the appliance for 10
seconds, allow for it to cool down
for 1 minute before using it again.
For soft foods like onions or
parsley, use 1-second, short
intermittent bursts.
10. Remove motor unit (4) and then the
middle cover (3).
11. Remove chopper blade (6) from the
glass container (1) by pulling away holding
the plastic section.
12. Remove the processed food from glass
container (1).
The inner part of the blade has
springs. When you seat the blade
on fixed shaft, you will feel a
backlash. Blade is secured when
you turn it left or right for a
quarter of turn.
13. When you want to remove blade from the
shaft, turn the blade left or right for a quarter
of turns to release and remove.
Ingredient Max.
amount
Processing
time
Speed ad-
justment
Lean meat
(small cu-
bes)
300 g
20 s
max II
Onion/
Garlic
(small piec-
es)
300 g
20 s
max II
Hazelnut
300 g
20 s
max II
Tomato
300 g
15-20 s
max II
Cheese
(small cu-
bes)
150 g
5-10 s
max II
Fruit
(cut into
pieces)
300 g
15-20 s
max II
Parsley
100 g
10 s
max II
Candied
date
500 g
5 s
max II
Things to do for energy saving
Follow the times recommended in the
manual during use. Unplug the appliance
after use.
9. Release the operation switch when the
operation is finished. Unplug the appliance
and wait for it to stop completely.
