PAGE
2
OF12
Introduction
Congratulations on the purchase of this quality appliance. We trust that you will enjoy
many years of trouble free use. Please read these instructions carefully before using the
appliance. This manual will provide you with information on how to operate and care for
your appliance in order that you gain the maximum benefit from it.
Unpacking
•
Please ensure that packaging material is disposed of in a responsible manner.
•
Remove all packing from the oven cavity and position the accessories.
•
If the appliance is damaged in any way, do not use it. Report the damage to your dealer,
who will take the necessary corrective action.
Installation
•
Surfaces immediately adjacent to the oven should be able to withstand temperatures of
up to 100
°C
without delaminating or discolouring.
Electrical installation
This appliance must be earthed and the manufacturer and the seller do not accept
responsibility for any damage due to incorrect installation or electrical connection.
This appliance should not be connected through an earth leakage system.
Refer to S.A.N.S. 10142
Connection to the power supply
This appliance has a ‘Y’ type supply cord connection and must be installed by a licensed
electrician, who will ensure that the stove is correctly connected and safely earthed. The
rated current is printed on the serial number label attached to the stove upper back panel.
The appliance must be connected to the mains through an All pole isolating switch which
has a minimum clearance between the contacts of 3 mm. in All poles.
A means for disconnection must be provided in the fixed wiring.
Owner’s responsibility
Since the following are not factory faults, they are the owner’s responsibility:
Damage to exterior finish.
Breakage of glass and other components.
Replacement of the light bulb.
Damage through improper installation or use of the appliance.
Damage caused by moving the appliance.
