PAGE
5
OF 12
Anti-Tilt mechanism
Method 2
•
“A”
1 x Stability chain
•
“B”
1 x Stability hook with anchor sleeve
•
“A”
is factory fitted at the rear of the stove in the centre.
•
Position the stove and move
“A”
to touch the wall behind the stove.
•
Mark the hole where
“A”
touches the wall behind the stove.
•
Move the stove away from the wall to allow for an area to work in.
•
Using a 8.0 mm concrete bit, drill a hole at the marked position.
•
Using the Stability hook and anchor sleeve
“B”
, firmly secure
“B”
to the wall.
•
Slide the stove back in position and engage the stability chain
“A”
onto the Stability
hook
“B”
.
•
The stove is then secured and will not accidentally tilt if downward pressure is applied
to the open oven door.
