F
Fo
orr F
Frro
on
ntt E
Effffe
ec
ctts
s S
Sp
pe
ea
ak
ke
errs
s
The BP1.2X and BP2X are ideal for use as front effects speakers in DSP installa-
tions. They should be placed on the front wall with the wire terminals against the wall
and the speakers separated by approximately two-thirds of the front wall. Placement
above ear level is recommended if possible; however, lower placement is possible, if
necessary.
It is our pleasure to offer assistance if you have any questions regarding your
BP1.2X and BP2X or their setup. Please contact your nearest Definitive Technology
dealer or contact us directly at 410-363-7148.
Service and warranty work on your Definitive loudspeakers will normally be per-
formed by your local Definitive Technology dealer. If, however, you wish to return
the speaker to us, please contact us first, describing the problem and requesting
authorization as well as the locations of the nearest factory service center.
Please note that the address given in this booklet is the address of our
offices only. Under no circumstances should loudspeakers be shipped to
our offices or returned without contacting us first and obtaining return
authorization.
Definitive Technology Offices
11433 Cronridge Drive
Owings Mills, Maryland 21117
Phone: 410-363-7148
M
Mo
ou
un
nttiin
ng
g tth
he
e B
BP
P1
1..2
2X
X a
an
nd
d B
BP
P2
2X
X
T
Te
ec
ch
hn
niic
ca
all A
As
ss
siis
stta
an
nc
ce
e
S
Se
errv
viic
ce
e
Each BP1.2X and BP2X comes with a premounted mounting plate which may be
used to hang the speakers on the wall. Use a toggle bolt or other similar anchored
fastener in the wall to hold the screw which the mounting plate will hang on. Do not
use an unanchored screw in the wall.
Visit us at www.definitivetech.com
