The use of the Soldering Needle Set convinces by temperature sta-
bility and high heat capacity of the tips which guarantees a regular
workflow.
The required temperature will be reached quickly by the infinitely
variable temperature adjustment, with constant control given by
the efficient heating element and designed circuit.
Contents:
Station
Iron 12 V / 7.5 W
Tip
Iron stand
Operating manual
Technical data:
Operating voltage:
primary AC 230 V / 50 Hz
secondary 12 V for iron
Power:
max. 10 W
Fuse:
0,08 A time lag
Temperature adjustment range: 1 - 7 continuously
Heating indication:
by LED
Picture:
1 Mains switch
2 Socket for Iron
3 LED heating-up control
4 Temperature adjustment
First steps:
1. Insert tip to iron.
2. The iron has to be placed on the iron stand.
3. Put the plug of the iron into the socket.
4. Connect the mains plug to the mains socket (230 V).
5. Switch on the unit.
6. Adjust the required temperature with the potentiometer.
Changing of the tip:
Exchanging the tip is quite easy, but should not be done as long as
the iron is hot (danger of severe burning!).
Pull the tip from the iron and replace the tip by a new one.
Safety precautions:
The manufacturer accepts no liability for other usage in a manner
deviating from the operating manual or for unauthorized modifica-
tions.
These operating manual and the warnings contained therein must
be read attentively and kept clearly visible in the vicinity of the sol-
dering device. Failure to heed these warnings can lead to accidents
and injuries or damage to health.
OPERATING MANUAL
EN
