Defender Phoenix 2.4", Manual

Page: 6 / 22

10 11
Connecting Power to the Monitor / Charging Battery
1. Connect the small end of power adapter marked MONITOR
into the DC input on the side of the monitor as shown in
the diagram.
2. Connect the other end of the adapter into an available wall
outlet. For safety reasons, ONLY use the adapters included
in the package.
3. Press the POWER / VIDEO ON-OFF BUTTON.
4. The icon in the top right corner of the main screen will show
you the battery power status.
EMPTY CHARGING FULL
Connecting Power to the Camera
1. Connect the small end of the power adapter
marked CAMERA into the DC input on the
back of the camera base as shown in the
diagram. For safety reasons, ONLY use the
adapters included in the package.
2. On the side of the camera, slide the POWER
switch UP to the ON position. The
POWER LED will light up.
DC Input
ON / OFF
Switch
DC Input
Power LED
SETUP
SIGNAL STRENGTH
NO STRONG
SIGNAL SIGNAL
BATTERY STRENGTH
EMPTY CHARGING FULL
VOLUME
OFF LOUD
2-Way Talk
BRIGHTNESS
DARK B LIGHT
CAMERA
CAM CAM CAM CAM SEQ
1 2
3 4 MODE
PAIRING
PAIRING CAM CAM CAM CAM
1
2 3 4
SCREEN ICONS
SUPPORT
EXIT
POWER SAVE MODE
OFF LOW MED HIGH