Adding and Removing Fobs
Press and hold the Volume button on the unit until the LED light comes on. When the light
comes on, press any button on the fob.
Two beeps means the fob has been paired successfully.
One beep means the fob has already been paired to the unit.
Three beeps means the unit cannot be paired with any more fobs (max 20 per unit).
To remove all fobs linked with the unit, press and hold the Tone button until the LED light
comes on. Then press and hold the Tone button again until the unit beeps four times.
Operating the Alarm with the Fob
As long as the unit is ON, it can be armed and disarmed using the fob.
To arm the alarm, press the Arm button on the fob. The unit will beep and flash once.
To disarm the alarm, press the Disarm button on the fob. The unit will beep and flash twice.
To activate the alarm instantly in an emergency, press the SOS button. The siren will sound,
regardless of the alarm being armed or disarmed.
To alter the alarm tone, press the Home button on the fob once. Each tone will play as you
press, simply stop on your preferred sound.
Installation
The diverse accessories included with the kit means the alarm can either be installed hanging
from a ceiling, fixed to a wall, or free standing. INDOOR USE ONLY
To mount, first affix the ball mount into the rear of the alarm.
WALL: Mark and screw the mount to the wall through the two guide holes.
Insert the ball mount affixed to the unit into the gap and secure.
CEILING: Mark and screw the mount to the ceiling through the two guide
holes. Insert the curved link piece into the mount by pressing the
ball into the socket on the mount. Then press the ball mount
affixed to the unit into the socket on the link piece and secure.
Adjust as needed.
To have the alarm free standing, follow the steps in Ceiling but use the
mounting bracket as a base on the flat surface of your choice.
You can also use the adhesive pad to install the alarm. Simply affix
one side of the pad to the rear of the battery compartment and fix
to your desired location.
NOTE:
When installing or moving the alarm, always ensure the alarm is set
to OFF, to avoid false alarms or triggering the anti-tamper on the battery compartment.
Defender Security Products
Unit 40
Manor Industrial Estate
Flint, Flintshire
CH6 5UY
Your Safety is Our Expertise
