three modes. Depending on the mode the button application changes. The device always switches on in the DVR
mode (while connecting USB port the menu allowing to select the mode appears).
BATTERY INSTALLATION
•
Put aside and then open the battery cover.
•
Insert the battery along the guides.
•
Close the cover.
MEMORY CARD INSTASLLATION AND REMOVING
•
Operate the memory card (not included) only if the device is switched off.
•
Put aside and then open the battery cover.
•
Insert the memory card until its clicking position directed it as shown on the device housing.
•
Check that you insert the memory card by the correct side, otherwise you may damage the device and the
memory card.
•
To remove the memory card press it until its clicking sound.
•
Close the battery cover.
•
If the speed of recording to the memory card is not sufficient, the appropriate icon will turn to yellow on the
LCD screen (in the DVR mode). If normal speed, the icon is white.
DVR SWITCHING ON
There are two different way to switch the DVR on.
•
Manual.
Hold the POWER button. If connected to the external power supply the DVR will start manual re-
cording. During the video recording the REC indicator will flash.
•
Automatic.
Connect the DVR to the external power supply via USB cable. The external power supply may be
the power supply included in the DVR packaging or the computer USB port. The DVR will start automatic-
ally. If connected to the computer it is necessary to select the operation mode manually, otherwise video re-
cording will start automatically (REC indicator will flash).
Note: if there is no free space on the memory card then trying to start recording the appropriate warning
will be shown on the LCD screen including the repeated mode. But if the recording in the repeated mode
stats successfully, then it will not be stopped if no free space.
DVR SWITCHING OFF
There are two different way to switch the DVR off.
•
Manual.
Hold the POWER button. The DVR will be switched off. The video must not be stopped.
•
Automatic.
While disconnecting the power supply included in the DVR packaging if the power supply is not
resumed, the DVR will be switched off automatically within 20 sec.
BATTERY CHARGING
The battery may be charged from the power supply included in the packaging of the DVR and from the USB port
of the computer. If the external power supply included in the DVR packaging is connected, the battery is charged
5
