2.
switch the date and time display on/off,
3.
switch the motion detector on/off. In this mode the device will record by files of 2 minute duration.
If while saving a file, there is no motion in the frame, the device will be switched to stand-by mode
and start recording if any motion. If the memory card is full, old files will be re-recorded by new
ones.
4.
switch the cycle recording on/off setting the duration of the file recording: 1 min/ 2 min/ 3 min/ 4
min/ 5 min,
5.
switch night vision mode on/off,
6.
switch the microphone on/off.
To enter the
second
part of the configuration, press the "MENU" button again. Here you can select:
1.
The memory card formatting.
2.
The menu language.
3.
Automatic power off. (Battery save mode: the device will be automatically powered off if not used).
4.
Automatic power off of the screen (Battery save mode: the screen will be automatically switched off
if no user's activity).
5.
To reset.
6.
To eliminate the light source twinkling by setting its frequency.
7.
To set date and time.
8.
To select the date format.
9.
To select the TV-standard: NTSC/PAL.
10.
To switch on/off the button sound.
11.
Software version.
Attention! Remember to confirm your selection by pressing "OK" button.
Photo mode
To switch to photo mode, press "MODE" button. Keep on pressing the button until the photo camera icon
will appear in the right upper corner.
To shoot the photo, press the "OK" button.
To set the necessary configurations of the photo, open the menu in the photo mode by "MODE" button. All
the settings are divided in 2 parts for convenience of display.
In the
first
part of the "Photo" configuration you can:
1.
set the resolution: VGA (640x480) / 1.3 MP/ 2 MP/ 3MP
2.
switch the date and time display on/off
3.
switch the shutter sound on/off.
To switch to the
second
part of the "Photo" configuration, press "MENU" button again. Here you can
select:
1.
The memory card formatting.
2.
The menu language.
3.
Date format.
4.
TV standard. NTSC/PAL
5.
Automatic power off
6.
Automatic power off of the screen
7.
To reset
