•
card-reader mode.
Each mode has its informational icons on the screen. The first menu tab activated by MENU button is
different for three modes. Depending on the mode the button application changes. The device always
switches on in the DVR mode (while connecting USB port the menu allowing to select the mode
appears).
BATTERY INSTALLATION
•
Uncover the battery pulling it as shown on the device housing.
•
Insert the battery along the guides.
•
Put the cover.
MEMORY CARD INSTASLLATION AND REMOVING
•
Operate the memory card (not included) only if the device is switched off.
•
Insert the memory card until its clicking position.
•
Check that you insert the memory card by the correct side, otherwise you may damage the device
and the memory card.
•
To remove the memory card press it until its clicking sound.
•
If the speed of recording to the memory card is not sufficient, the appropriate icon will turn red on
the LCD screen (in the DVR mode). If normal speed, the icon is white.
DVR SWITCHING ON
There are two different way to switch the DVR on.
•
Manual.
Hold the POWER button. After switching on the DVR recording will start automatically.
•
Automatic.
Connect the DVR to the external power supply via USB cable. The external power sup-
ply may be the power supply included in the DVR packaging or the computer USB port. The DVR
will start automatically. If connected to the computer it is necessary to select the operation mode
manually, otherwise video recording will start automatically.
Note: if there is no free space on the memory card then trying to start recording in the non-
repeated mode the DVR will make sound and the corresponding warning will appear on the LCD
screen.
DVR SWITCHING OFF
There are two different way to switch the DVR off.
•
Manual.
Hold the POWER button. The DVR will be switched off. The video must not be stopped.
•
Automatic.
While disconnecting the power supply included in the DVR packaging if the power sup-
ply is not resumed, the DVR will be switched off automatically in 15 sec.
BATTERY CHARGING
The battery may be charged from the power supply included in the packaging of the DVR and from the
USB port of the computer. If the external power supply included in the DVR packaging is connected, the
5
