2
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
•
When using electrical appliances basic safety precautions should always be
followed.
•
Check that the voltage indicated on the PSU rating plate corresponds with that of
the local network before connecting the appliance to the mains power supply.
•
Only use the supplied PSU or one of identical specification.
•
The power supply must be connected to a grounded mains supply.
•
There are no user serviceable parts in this appliance. Refer all servicing to
qualified personnel.
•
Do not operate the unit if you detect smoke or a strange smell coming from the
unit.
•
If the screen is cracked or damaged the monitor must be considered scrap and
disposed of under local WEEE regulations.
•
Install the appliance on a stable and level surface. Avoid any unstable locations in
order to avoid damage to property or personal damage.
•
This monitor is for indoor use only.
•
Do not install above a heat source or close to heat generating devices.
•
Do not cover or in any way block the ventilation slots.
•
Ensure there is ample space surrounding the monitor in order to allow ventilation
and avoid overheating.
•
If the monitor is not in use for a long period of time, switch the power off and
unplug the power supply.
•
Before cleaning, switch off the power and unplug the power supply.
•
When cleaning, use a soft lint-free dry cloth to remove any dust that may have
accumulated.
•
Do not use any chemicals, abrasives or solvents that could damage the unit.
OPTIONAL WALL MOUNTING
WHAT’s INCLUDED
•
AC Mains cable
•
Power Supply Unit
•
Monitor
•
User Manual
Caution:
The wall mount must be capable of supporting the monitor’s net weight.
•
To mount your monitor to the wall you need to purchase a suitable VESA wall
mount for the size and weight of the monitor with 100 x 100mm M4 x 8mm screws.
•
Place the monitor face down on a protective cloth and attach the wall mount to the
matching captive nuts in the rear of the monitor casing.
•
Remove the four screws from each side of the mounting stand and remove the
stand.
•
It is advisable to connect all required cables to the monitor before finalising the
mounting to the wall as access to the connection sockets is less restricted.
