Introduction
The
PosiTest PC Powder Checker
is a hand-held, non-contact
coating thickness gage that uses high-frequency ultrasound to
predict the cured thickness of uncured powder coatings.
1
1.
POWER-UP
the
PosiTest PC
by pressing the button.
2.
ZERO
the gage using the supplied Zero Fixture (pg. 4).
3.
MEASURE
the applied powder (pg. 4).
4.
ADJUST
to the specific powder if necessary (pg. 8).
Quick Start
PosiTest PC Contents
n
PosiTest
PC
gage
n
Zero Fixture
n
Replacement probe screen
n
4 AAA alkaline batteries
n
Instruction manual
n
Hard shell carrying case
n
USB Cable
n
PosiSoft Desktop reporting software
n
Two (2) year warranty
To preserve battery life, the
PosiTest PC
will power
down after approximately 5 minutes of no activity. All settings are
retained.
NOTE:
The USB Port has several functions:
n
Gage updates (pg. 10)
n
USB Keyboard Mode /
live stream readings (pg. 10)
n
Download stored readings to
PosiSoft Desktop (pg. 10)
n
Allows the gage to be operated
without batteries when
connected to a suitable
USB power supply
Sensor/Screen
Display
Buttons
USB Port
