9
Instrument Operation
The
PosiTest HHD
is ready for testing only after
performing
Steps 1-4
in the
Quick Start
(pg. 5).
IMPORTANT:
1. Press the power button to power-up the detector. The
PosiTest HHD
is now in
Standby Mode
(pg. 1).
2. Press the button to access the menu. Navigate using
the or buttons. Press to select.
3. Select the preferred
Audio
and
Strobe Alarm
settings (pg. 10).
4. Adjust the test voltage (pg. 7).
5. To activate the high voltage output and enable
Detection
Mode
, press and hold the power button and activate and
hold the safety trigger. The lightning bolt icon will appear at
the bottom of the display and the
PosiTest HHD
will show the
test voltage being generated.
6. Continue holding the safety trigger and release the power
button .
7. Move the electrode over the coated surface at a travel speed
not to exceed 0.3m/second (1ft/second) to locate defects. If a
holiday is detected, the
PosiTest HHD
will activate the strobe
and/or the audio alarm (depending upon setup).
8. Release the safety trigger to deactivate the high voltage output
and return the
PosiTest HHD
to
Standby Mode
(pg. 1).
-
+
