DEFEAT-19 PSF-B201, User Manual

Page: 7 / 13

DEFEAT-19.Cleaning
USING THE UNIT
Never turn the PSF- B201 “on” unless the
blue flow adjuster knob is turned fully
clockwise to the closed position and the
fluid tank cap is tight.
With its Power Cord plugged into an appropriate power source,
and the blue Flow Adjuster Knob turned fully clockwise and closed,
the PSF-B201 is ready for use.
To begin fogging, simply turn the PSF-B201 ON by pushing the
Power Switch to the ON position and then turning the blue Flow
Adjuster Knob very slightly counterclockwise until the desired fine
spray volume is achieved
To turn the PSF-B201 OFF, please be sure to follow these steps*:
a) Raise the Application Hose Handle to a height above the fluid
level in the Fluid Tank.
b) While keeping the Application Hose Handle above the fluid
level in the Fluid Tank, turn the PSF-B201 OFF by pushing the
Power Switch to the OFF position.
c) Continue to hold the Application Hose Handle at a height above
the fluid level in the Fluid Tank for 3-5 seconds.
d) Turn the Blue Flow Adjuster Knob fully clockwise to the closed
position
* Failure to follow the above protocol can lead to fluid leaking out of the Discharge
Nozzle and onto the floor, as well as into the Application Hose and, ultimately, into the
Motor Housing and Motor, potentially causing premature Motor failure.