BOLT-ON BED RAIL
Page 2 of 3
1/20/11 Rev1(DP)
Top Plate
10mm x 50mm Allen Bolt
Side of Stake Pocket
Thin black line
represents
plastic bed cap
Bed Rail
Top of bedside
Fig 3
Note that size of stake pocket
may be smaller than line
molded into cover by factory.
Determine location of stake
pocket before cutting cover.
Picture for example only, actual
vehicle may be different.
Dotted line represents
approximate size of
stake pocket hidden
under plastic cover
Determine location of center of stake
pocket before cutting cover. Start with a
small hole and gradually enlarge the
hole to the size of the stake pocket only.
Do not follow lines molded into cover!
Fig 2
Fig 1
Remove cover if equipped.
Note, on some vehicles, size of
opening in cover may be larger
than actual stake pocket
Threaded
Plate
