Once the tool box is centered, mark and drill the mounting hole for the J-hook.
The mounting hole should be near the center of the box, and near the lip of the truck bed rail
TOP VIEW OF TOOL
BOX BODY IN TRUCK BED
Note: After you have marked
the location to drill,
slide the tool box towards
the side you are not
Drill a 13/32" hole on each end of the tool box.
drilling to make sure
Be sure to drill between the edge of the tool box and the bed rail.
you don't hit the bedrail
with the drill bit.
3
HOLE FOR J-BOLT SHOULD BE
IN THIS AREA
LIP OF TRUCK BED RAIL
UNDER TOOL BOX
