DEES DSI-375, User Manual

Page: 26 / 48

In this application, the DSl can be configured to ring on any line or group
of lines when the MBS is on-hook.
Action
Step 1: Apply power or disconnect and then reapply.
The LED will flash rapidly and you have 20 seconds to
commence programming.
Step 2: Press the and then press
Step 3: On your dial pad depress the numbers that correspond with
the line keys you wish to ring. See fig. 1, page 6
Step 4: Press to enter this configuration.
For example, to make line buttons 2, 3 and 4 to ring the following keys
would be pressed:
Now any call that appears on line buttons 2, 3 or 4 (normally not ringing
lines), will make the DSl ring using the standard MBS ringing cadence.
22
Configuration 4
Set Idle On-Hook
*
# 1
4
*
# 4 4 2 1 3