WARNING
To avoid electrical shock or product failure, this lamp must be used in dry
locations and in open fixtures only.
This product is not a toy and should not be stored or left in locations
accessible to young children.
To avoid possible fire, product damage, or early lamp failure, this lamp
should not be used in heat-producing appliances.
To avoid possible fire hazard, only connect the strip to constant votage 12V
DC.
To prevent early lamp failure, lamp should only be installed in operating
environments ranging between: -14°F to +104°F (-10°C to +40°C).
To prevent early lamp failure, lamp should not be bent roughly in the
position of LED chips. It is suggested that the bent angle should be greater
or equal than 90 degrees.
CAUTION
Pull out the plastic battery barrier sheet from the
battery compartment located on the bottom of the
remote.
When not using this product for extended periods,
remove batteries to prevent product damage due to
battery leakage.
Observe proper polarity when changing batteries.
Lamp may not light if batteries are inserted
incorrectly.
To prevent danger from explosion or leakage, do
not throw batteries into fire or expose them to
excessive heat.
Correct
Incorrect
Incorrect
Angle≥90°
Angle<90°
