By
FOURTH PRESS
on
SDT
button you go out from the regime “setting-up” and
the symbol
PLEASE WAIT
appears on the display
:
Five seconds after its disappearance the work with the device can go on.
As we mentionted before Ground Pioneer 4500 can work in two regimes of
discrimination – with or without
SOUND DISCRIMINATION
.You can chooce
these regimes by pressing on
button. Independently of whether you
work in regime with or without sound discrimination the symbol Fe appears when
ferrous object is indicated.
Another button on the display of Ground Pioneer4500 is the button for
the choice of search regimes –
AUTO
or
SEMIAUTO.
Automatic mode is
motion detection.The search coil needs to be moved completely through the
target area.The Ground Pioneer 4500 retunes automatically of the ground
conditions(mineralization).
Semiauto is “no motion” regime.The setting-up is done by button
RES.
Button to
RESET
control unit in new ground conditions.Depressing
button one or more times is needed in each new targer area or if any other
settings are changed. Pressing reset over metal will ignore similar metal
targets.The unit needs to be reset over a clear area ( not on targets),not
including minerals in ground.After pressing the Reset button appears the symbol
“Please wait”:
Five seconds after its disappearance the work with the device can go on.
- 12 -
