DeepCoolClear, LLC
deepcoolclear.com
512-478-3112
Directions-
To use the TraqFi™ Adapter, follow these steps.
1. Vertical Mount Bracket –
The Vertical Mount Brackets are designed to clip to the Openmesh OM2P devices.
a. Attach the device to the device mount on the TraqFi™ Adapter.
b. Snap the OM2P so it clips into the holders of the Vertical Mount Bracket.
c. The power connector is either a POE capable Ethernet cable or a power connector.
Connect the POE Ethernet into the POE port of the OM2P or connect the Power
connector to the power port of the OM2P. The OM2P uses a 12V power supply.
