Deenkee I7 Owner'S Manual Download Page 12

Page: 12 / 22

4.1.3 Operation guideline of indicators

4.2 Charging Methods

4.2.1 Manual Charging

2. Charging via the remote control:
When the cleaner is in standby mode,
press the

" "

button to have the machine

enter the recharge mode.

1. Charging with the docking station:
Connect the adapter to the docking station first, and
then insert to the power supply; Place the vacuum
cleaner on the docking station for charging. (The
green

" "

indicator will flash when looking for

dock station,the green indicator on dock station will
be off when charge back successfully; The red

" "

indicator will flash during charging and

keep on after fully charged).

CLEAN

Turn-off

Light-off

Red Light-on

Green Light-on

Flash Green

Flash Red

Flash Orange

Flash red and beep

Light off

Long-press

" "

4S and enter the

OFF state.

Short-press

" "

and enter the

Auto Cleaning mode.

In standby,long-press " " 6S till
orange " " blinks, meanwhile
press " " on remote control,till
beep sound heard

Double click

" "

and it will enter

the Recharge mode.

Short-press

" "

and enter the

Standby state.

Turn-on

Cleaning

Recharge

Charging

Error

Fully Charged

Pairing mode

No.

State

Display

Operation

- 11 -

Danger!

Electric shock.

Summary of Contents for I7























Search results

Summary of Contents for I7

Reviews:

Brands by name

Popular brands

Deenkee I7, Owner'S Manual

Search results

Summary of Contents for I7

Reviews:

Brands by name

Popular brands