Q & A for Auto-Empty Station
1. Auto-emptying cannot start when the T8 returns to the auto-empty station
base.
(1) Please check that the base and main body of the station are correctly
assembled as described in the user manual.
(2) Please check that the station's power cable is plugged into the socket and
connected to the auto-empty station.
(3) The station's dust cover needs to be fully closed while auto-emptying is in
progress.
(4) Please ensure that the disposable dust bag is fitted correctly.
(5) Auto-emptying will not start when Do Not Disturb mode is enabled in the user
settings.
(6) Auto-emptying will not start when you tell DEEBOT to return to the station
after you have finished using Video Manger.
(7) Auto-emptying will not start if you move DEEBOT back to the station by hand;
it is only triggered when the device returns automatically.
If you have ruled out the issues above and the problem persists, please contact
ECOVACS Customer Care.
2. Cannot install the special dustbin provided for use with the auto-empty station
in the T8.
(1) When installing the dustbin, you need to lift the handle first in order to install
it inside the casing, and you need to lift the handle again to remove it.
(2) Please check whether the cover over the two air vents on the underside of
DEEBOT's dustbin have been removed; if not, use the key provided to remove the
cosmetic fitting over the two dust vents (see user manual).
3. Auto-empty station cannot start auto-emptying as normal when the red
indicator is showing.
(1) Please check that the special dustbin provided for use with the auto-empty
station has been fitted in the T8 (there are two openings on the underside of the
dustbin).
(2) On the underside of the dustbin provided for use with the station, check
whether the two flaps are jammed by a foreign object, and if so, clear them.
(3) Please check that the cosmetic fitting over the two dust vents on the
underside of the T8 casing has been removed using the key provided.
(4) Please check for any major blockage of the air ducts on the underside of the
