6 Shut Down Sensor and Tec Case
Dedrone
18
IM-Inst-EK2536en
6
Shut Down Sensor and Tec Case
Multi Sensor or RF-100 breaks
By disconnecting the cable or shut down the Tec Case without shut down the sensor, the
sensor could break.
•
Always shut down the sensor in the DT Control Center
before
disconnecting the cable
or shut down the Tec Case.
Procedure:
1
Connect to the DT Control Center.
2
Choose menu
OPTIONS > Site Configuration
.
3
For each connected Multi Sensor and RF-100, right-click on the sensor symbol and
choose
System > Shutdown Hardware
.
In the header the message
Network error, reconnecting...
is shown.
The light of the blue button at the Multi Sensor or RF-100 turns off.
4
Push the blue button at the outside of the Tec Case.
The light of the blue button at the Tec Case turns off and the Tec Case is off.
5
Disconnect all cables from the Tec Case and the sensors.
6
Push the blue button inside the Tec Case.
The battery display in the Tec Case turns off and the Tec Case is shut down.
