Hardware description | Seite
8
2.2. 3pin connection cable
The connection to the stick on the RS-232 side will be made by a 3pin connection
cable. The ends of the wires are labeled with "RX", "TX" and "GND".
RS-232 Pin Assignment
Pin
Brown
RX
White
TX
Green
GND
2.3. LED's
Two LED’s visualisation of transmit and receivedata.
1*TX
(transmit)
1*RX
(receive)
Summary of Contents for USB-RS232-TTL-STICK
