StarProg-A Universal Online Programmer User Manual
www.dediprog.com
18
Method C. Standalone Programming (Use start button)
Standalone does not require a computer for programming. Just insert a SD card with projects
files, connect the power cable to the programmer, and press the start button to begin.
Step 1: Test and save the project (*dprj)
under Dediware
engineering mode
.
Make sure to select “Start from handler” for
start mode
in the
Config
window. And
use DownPrj to load the project file to the embedded memory.
Step 2: Connect the external power to StarProg-A (Not connected to USB), only need
to press the Start key on the programmer to execute programming.
Attention:
StarProg-A must have a license key in order to program, if it is a demo license key, then it
will not support stand-alone programming function; the permanent key is not limited to
this regulation.
ICP
