NuProg-E Engineering UFS/EMMC Programmer User Manual
www.dediprog.com
18
Value Descriptions:
File Format:
The format of the programming file
.
File Checksum:
The file checksum’s calculation method.
File Offset:
Appoint an address to start loading the buffer.
File Path:
Assign a path for the programming file.
Skip Blank Value:
Enable this function to analyze and skip the blank data
before programming, which will write more efficiently and reduce the
programming time.
Partition Name:
It depends on the partitioned sections.
Note: This partition here will only show the amounts and settings according the
IC that has been detected.
Sector Index:
Set up the sector starting point
Sector Count:
Set up total programming sectors.
AutoSetFileOffset
:
When setting the
Sector Index
, this function can
automatically calculate the File Offset.
+:
When there is more than one programming file, please press “+” to add the
files to the data list.
Show Images and Hide Images:
Open and close the data list.
Load Prj:
Import previous programming files (Not Supported Yet).
Save Prj:
Save all the settings as a programming file (Not supported yet).
