DeDietrich NeOvo Condens EFU C 40, User Manual

Page: 30 / 48

Parameter Description Unit CU-OH04 PCB SCB-04B PCB
SCB-04C PCB
AC002 Number of hours' burner operation since the last
service
hours X
AC003 Number of hours' operation since the last service hours X
AC004 Number of burner start-ups since the last service - X
SERVICE Resetting the maintenance service
: hour run meters , ,
are reset.
- X
Tab.12 List of parameters in the
sub-menu of the menu
Parameter Unit
HOURS Can be set from 0 to 23 available
MINUTE Can be set from 0 to 59 available
DATE Can be set from 1 to 31 available
MONTH Can be set from 1 to 12 available
YEAR Can be set from 2000 to 2100 available
8.2 Setting the parameters
8.2.1 Modifying the User parameters
Caution
Altering the factory settings may impair operation of the appliance.
1. Access the User menu.
Important
The User menu is only available when the icon flashes.
2. Select the desired sub-menu by pressing the or key.
3. Confirm the selection by pressing the
key.
4. Select the required parameter by pressing the or keys to scroll
through the list of adjustable parameters.
5. Confirm the selection by pressing the key.
6. Modify the value of the parameter using the or keys.
7. Confirm the new value of the parameter by pressing the
key.
8. Go back to the main display by pressing the
h
key.
For more information, see
Browsing in the menus, page 19
Selecting a PCB, page 20
8.2.2 Setting the heating
Caution
Altering the factory settings may impair operation of the appliance.
Note
The heating mode can be managed using the TIME PROG menu.
Fig.40
MW
-5
0
0
0
0
0
8
-2
Fig.41
MW
-5
0
0
0
0
4
0
-6
8 Control panel settings IniControl 2
30 EFU C 7642056 - v06 - 31072017