35
GT 530A
DDR_G30A/AE _IO_V4.0 09/2013
As Set up
18
Assembling the sweeping Covers
R1
F2
i
Each cover is fitted with a system whereby it
can only be mounted with the handles turned
outward.
1
The covers are numbered from 1 to 4, and must be
fitted with thermocord. The length of the thermocord
depends upon the cover and is given below.
2
Place the 2 no. 1 sweeping covers (with the handles
turned outward) on either side of the boiler starting
from the front. Distribute the other covers evenly.
Fit the two locks of each cover between the sections.
3
Push the cover towards the outside of the boiler, to the
closed position.
4
Fasten the two brass nuts of each cover.
F2
R1
Rear
Front
Cover Model
No.1
No.2
No.3
No.4
Boiler type
Number of sweeping covers per type
Front
Rear
GT 530A-15
2
4
2
GT 530A-16
2
4
2
GT 530A-17
2
6
GT 530A-18
2
2
6
GT 530A-19
2
6
2
GT 530A-20
2
6
2
GT 530A-21
2
8
GT 530A-22
2
6
2
2
GT 530A-23
2
6
4
GT 530A-24
2
8
2
GT 530A-25
2
10
GT 530AE-26
2
8
2
2
GT 530AE-27
2
10
2
GT 530AE-28
2
10
2
GT 530AE-29
2
12
GT 530AE-30
2
10
2
2
GT 530AE-31
2
12
2
GT 530AE-32
2
12
2
Thermocord
Length
52.5” /1,335mm
43.7”/1,110mm
35”/890mm
26.18
/665mm