2 6 kW heating element - Package EG 93
1. Make a small notch in the cover and pass through the mains
electricity supply cable (not supplied).
2. Connect earth wire 2 to the earth terminal on the flange as shown
in the close-up below.
3. Make the connections to the left-hand side of the thermostat as
shown in the diagram and close-ups below.
Mains supply: 400 V3~
Wiring diagram
6 kW heating element - Package EG 93
Resetting the safety thermostat
?
Switch off the mains electricity supply before carrying out
any work on the heating tank.
If the safety thermostat cuts out:
1. Switch off the mains supply.
2. Remove the cover held by 2 screws.
3. Use a flat-bladed screwdriver to push in reset button S located on
the thermostat (see diagram).
B3
B1
B2
A3
A1
A2
400V
3
L3
L1
L2
RO
NO
MA
BA
BA
BA
8980N065
8980N067B
s
s
400V3
S
s
8980N066
AD051
