5
For detailed operating method read the co rresponding conte nt on the instruction manual.
For each wash cycle.
For programs with pre-wash,please put the detergent anywhere inside the
inner tank except in compartment A
(Follow the user instructions!)
Electric indicator on control panel (if provided).
Check the rinse aid level
(On models with water softener system only.)
Electric indicator on control panel (if provided).
If there is no salt warning light in the control panel
(for some models), you can estimate when to fill the salt into
the softener by the number of cycles the dishwasher has run.
Check the regeneration
salt level
Load the baskets
Select a programme
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few m inutes (abou t 15 m inutes ) befo re unlo ading the dis hwas her to avoid
han dling the dis hes an d uten sils w hile th ey are still h ot and more s uscep tible t o brea k.
The dishe s will also dry bett er. Firs t start unloa ding th e lowe r bask et.
Changing the programme
Ad ding fo rgotte n dish es
in t he dis hwash er.
To lo ad the baske ts, ref er to th e sect ion en titled
.
" Prepa ring an d Loa ding D ishes"
Touc h the P rogra mme B utton until th e sele cted p rogram me li ghts u p.
( See the s ection entitle d
Op eratio n instr uction
)
“
”
If the appliance is switched
off during a wash cycle.
Open the do or care fully.
Look o ut for hot ste am
when openin g the d oor!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Switch on the appliance
Open the door,
the On/Off button to switch on the appliance .
touch
1.Open the door a little to stop the dishwasher.
2.After the spray arms stop working, you can open the door completely.
3.Add the forgotten dishes.
4.Close the door, the dishwasher will start running again .
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
Since the appliance is standing by, it will power off automaticly after 30 minutes without any operation.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is the case, the detergent
dispenser must be refilled.
2.
the start/pause button to stop the washing, press the
for more than 3
seconds to cancel the running programme.
3. Select a new programme.
4. Restart the dishwasher.
Programme Button
Touch
Turn on the wate r tap a nd pre ss the Start/ Pause Butto n. The mach ine wi ll start worki ng afte r
abou t 10 seconds.